Separation and Preconcentration of Anionic Dyes Using Magnetic Nanoparticles with Modify Polymer Ionic Liquid

Mahboobeh Falahati; Majid Soleimani; Fateme Aflatouni

doi:doi:10.11648/j.ajhc.20230901.11

| Peer-Reviewed

Separation and Preconcentration of Anionic Dyes Using Magnetic Nanoparticles with Modify Polymer Ionic Liquid

Mahboobeh Falahati, Majid Soleimani, Fateme Aflatouni

Published in American Journal of Heterocyclic Chemistry (Volume 9, Issue 1)

Received: 22 January 2023 Accepted: 7 April 2023 Published: 20 April 2023

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In this study, functionalized magnetic nanoparticles of poly (ionic liquid) 1-allyl-3-methylimidazolium chloride were prepared through free radical copolymerization method and tested as a high efficient adsorbent for the removal of anionic dyes in water samples. The physical and chemical structure of prepared magnetic nanoparticles (MNPs) were investigated using Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Next, synthesized magnetic nanoparticles were used in magnetic solid phase extraction (MSPE) method to extract three anionic dyes (Alizarin Red S, Congo Red and Methyl Orange) in water samples. Also, the effect of several parameters such as pH, temperature, contact time and amount of adsorbent was investigated and the optimum values were determined. In addition, the adsorbent has a high ability to remove anionic dyes from water samples containing different dyes. Limit of detection (LOD), limit of quantitation (LOQ), and correlation coefficient were determined for methyl orange, Congo red and alizarin red S dyes under optimum conditions. The synthesized magnetic nanoparticles can be collected by an external magnetic field and regenerated with an alkaline solution (NaOH) and reused. The obtained results showed that the MNPs@PIL method was very efficient and successful in removing dye pollutants in water samples.

Published in	American Journal of Heterocyclic Chemistry (Volume 9, Issue 1)
DOI	10.11648/j.ajhc.20230901.11
Page(s)	1-8
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Poly (Ionic Liquid), Magnetic Solid-Phase Extraction (MSPE), Fe₃O₄, Nanoparticles, Alizarin Red S, Congo Red, Methyl Orange

References

[1]	Wu, L., Yu, L., Ding, X., Li, P., Dai, X., Chen, X., & Ding, J. (2017). Magnetic solid-phase extraction based on graphene oxide for the determination of lignans in sesame oil. Food chemistry, 217, 320-325.
[2]	Herrero-Latorre, C., Barciela-García, J., García-Martín, S., Peña-Crecente, R. M., & Otárola-Jiménez, J. (2015). Magnetic solid-phase extraction using carbon nanotubes as sorbents: a review. Analytica Chimica Acta, 892, 10-26.
[3]	Deng, Y., Qi, D., Deng, C., Zhang, X., & Zhao, D. (2008). Superparamagnetic high-magnetization microspheres with an Fe3O4@ SiO2 core and perpendicularly aligned mesoporous SiO2 shell for removal of microcystins. Journal of the American Chemical Society, 130 (1), 28-29.
[4]	Ulman, Abraham. (1996) "Formation and structure of self-assembled monolayers." Chemical reviews 96.4, 1533-1554.
[5]	Pham, Thi Phuong Thuy, Chul-Woong Cho, and Yeoung-Sang Yun. (2010) "Environmental fate and toxicity of ionic liquids: a review." Water research 44.2, 352-372.
[6]	Yuan, Jiayin, & Markus Antonietti. (2011) "Poly (ionic liquid) s: Polymers expanding classical property profiles." Polymer 52.7, 1469-1482.
[7]	Yuan, Jiayin, David Mecerreyes, & Markus Antonietti. (2013) "Poly (ionic liquid) s: An update." Progress in Polymer Science 38.7, 1009-1036.
[8]	Young, Joshua A., Zhang, C., Devasurendra, A. M., Tillekeratne, L. V., Anderson, J. L., & Kirchhoff, J. R. (2016). Conductive polymeric ionic liquids for electroanalysis and solid-phase microextraction. Analytica chimica acta, 910, 45-52.
[9]	Devasurendra, A. M., Zhang, C., Young, J. A., Tillekeratne, L. V., Anderson, J. L., & Kirchhoff, J. R. (2017). Electropolymerized pyrrole-based conductive polymeric ionic liquids and their application for solid-phase microextraction. ACS applied materials & interfaces, 9 (29), 24955-24963.
[10]	Aflatouni, F., & Soleimani, M. (2018). Preparation of a new polymerized ionic Liquid-Modified magnetic nano adsorbent for the extraction and preconcentration of nitrate and nitrite anions from environmental water samples. Chromatographia, 81 (11), 1475-1486.
[11]	Huang, X., Chen, L., Yuan, D., & Bi, S. (2012). Preparation of a new polymeric ionic liquid-based monolith for stir cake sorptive extraction and its application in the extraction of inorganic anions. Journal of Chromatography A, 1248, 67-73.
[12]	Mohan, S. Venkata, N. Chandrasekhar Rao, & J. Karthikeyan. (2002) "Adsorptive removal of direct azo dye from aqueous phase onto coal-based sorbents: a kinetic and mechanistic study." Journal of hazardous materials 90.2, 189-204.
[13]	Modak, Jayant B., Avijit Bhowal, & Siddhartha Datta. (2016) "Extraction of dye from aqueous solution in rotating packed bed." Journal of hazardous materials 304, 337-342.
[14]	Bhowmik, M., Debnath, A., & Saha, B. (2020). Fabrication of mixed phase CaFe2O4 and MnFe2O4 magnetic nanocomposite for enhanced and rapid adsorption of methyl orange dye: statistical modeling by neural network and response surface methodology. Journal of Dispersion Science and Technology, 41 (13), 1937-1948.
[15]	Wu, Zhijian, Joo, H., Ahn, I. S., Haam, S., Kim, J. H., & Lee, K. (2004). Organic dye adsorption on mesoporous hybrid gels. Chemical Engineering Journal, 102 (3), 277-282.
[16]	Yang, Jia-Ying, Jiang, X. Y., Jiao, F. P., & Yu, J. G. (2018). The oxygen-rich pentaerythritol modified multi-walled carbon nanotube as an efficient adsorbent for aqueous removal of alizarin yellow R and alizarin red S. Applied Surface Science, 436, 198-206.
[17]	Gautam, Ravindra Kumar, Ackmez Mudhoo, & Mahesh Chandra Chattopadhyaya. (2013) "Kinetic, equilibrium, thermodynamic studies and spectroscopic analysis of Alizarin Red S removal by mustard husk." Journal of Environmental Chemical Engineering 1.4, 1283-1291.
[18]	Deng, Yonghui, Qi, D., Deng, C., Zhang, X., & Zhao, D. (2008). Superparamagnetic high-magnetization microspheres with an Fe3O4@ SiO2 core and perpendicularly aligned mesoporous SiO2 shell for removal of microcystins. Journal of the American Chemical Society, 130 (1), 28-29.
[19]	Asghar Nezhad, A. A., Mollazadeh, N., Ebrahimzadeh, H., Mirbabaei, F., & Shekari, N. (2014). Magnetic nanoparticles based dispersive micro-solid-phase extraction as a novel technique for coextraction of acidic and basic drugs from biological fluids and waste water. Journal of Chromatography A, 1338, 1-8.
[20]	Ho, Yuh-Shan, & Gordon McKay. (1998) "Sorption of dye from aqueous solution by peat." Chemical engineering journal 70.2, 115-124.
[21]	Yen, Ming-Tsung, Joan-Hwa Yang, & Jeng-Leun Mau. (2009)."Physicochemical characterization of chitin and chitosan from crab shells." Carbohydrate polymers 75.1, 15-21.
[22]	Kumar, M., Tamilarasan, R., & Sivakumar, V. (2013). Adsorption of Victoria blue by carbon/Ba/alginate beads: kinetics, thermodynamics and isotherm studies. Carbohydrate polymers, 98 (1), 505-513.
[23]	Mohammed, M. I., Ismael, M. K., & Gönen, M. (2020, February). Synthesis of Chitosan-Silica Nanocomposite for Removal of Methyl Orange from Water: Composite Characterization and Adsorption Performance. In IOP Conference Series: Materials Science and Engineering (Vol. 745, No. 1, p. 012084). IOP Publishing.
[24]	Ghaedi, M., Najibi, A., Hossainian, H., Shokrollahi, A., & Soylak, M. U. S. T. A. F. A. (2012). Kinetic and equilibrium study of Alizarin Red S removal by activated carbon. Toxicological & environmental chemistry, 94 (1), 40-48.
[25]	Toor, M., Jin, B., Dai, S., & Vimonses, V. (2015). Activating natural bentonite as a cost-effective adsorbent for removal of Congo-red in wastewater. Journal of Industrial and Engineering Chemistry, 21, 653-661.
[26]	Fan, L., Zhang, Y., Li, X., Luo, C., Lu, F., & Qiu, H. (2012). Removal of alizarin red from water environment using magnetic chitosan with Alizarin Red as imprinted molecules. Colloids and Surfaces B: Biointerfaces, 91, 250-257.

Cite This Article

Plain Text BibTeX RIS

APA Style

Mahboobeh Falahati, Majid Soleimani, Fateme Aflatouni. (2023). Separation and Preconcentration of Anionic Dyes Using Magnetic Nanoparticles with Modify Polymer Ionic Liquid. American Journal of Heterocyclic Chemistry, 9(1), 1-8. https://doi.org/10.11648/j.ajhc.20230901.11

Copy | Download

ACS Style

Mahboobeh Falahati; Majid Soleimani; Fateme Aflatouni. Separation and Preconcentration of Anionic Dyes Using Magnetic Nanoparticles with Modify Polymer Ionic Liquid. Am. J. Heterocycl. Chem. 2023, 9(1), 1-8. doi: 10.11648/j.ajhc.20230901.11

Copy | Download

AMA Style

Mahboobeh Falahati, Majid Soleimani, Fateme Aflatouni. Separation and Preconcentration of Anionic Dyes Using Magnetic Nanoparticles with Modify Polymer Ionic Liquid. Am J Heterocycl Chem. 2023;9(1):1-8. doi: 10.11648/j.ajhc.20230901.11

Copy | Download

@article{10.11648/j.ajhc.20230901.11,
  author = {Mahboobeh Falahati and Majid Soleimani and Fateme Aflatouni},
  title = {Separation and Preconcentration of Anionic Dyes Using Magnetic Nanoparticles with Modify Polymer Ionic Liquid},
  journal = {American Journal of Heterocyclic Chemistry},
  volume = {9},
  number = {1},
  pages = {1-8},
  doi = {10.11648/j.ajhc.20230901.11},
  url = {https://doi.org/10.11648/j.ajhc.20230901.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajhc.20230901.11},
  abstract = {In this study, functionalized magnetic nanoparticles of poly (ionic liquid) 1-allyl-3-methylimidazolium chloride were prepared through free radical copolymerization method and tested as a high efficient adsorbent for the removal of anionic dyes in water samples. The physical and chemical structure of prepared magnetic nanoparticles (MNPs) were investigated using Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Next, synthesized magnetic nanoparticles were used in magnetic solid phase extraction (MSPE) method to extract three anionic dyes (Alizarin Red S, Congo Red and Methyl Orange) in water samples. Also, the effect of several parameters such as pH, temperature, contact time and amount of adsorbent was investigated and the optimum values were determined. In addition, the adsorbent has a high ability to remove anionic dyes from water samples containing different dyes. Limit of detection (LOD), limit of quantitation (LOQ), and correlation coefficient were determined for methyl orange, Congo red and alizarin red S dyes under optimum conditions. The synthesized magnetic nanoparticles can be collected by an external magnetic field and regenerated with an alkaline solution (NaOH) and reused. The obtained results showed that the MNPs@PIL method was very efficient and successful in removing dye pollutants in water samples.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Separation and Preconcentration of Anionic Dyes Using Magnetic Nanoparticles with Modify Polymer Ionic Liquid
AU  - Mahboobeh Falahati
AU  - Majid Soleimani
AU  - Fateme Aflatouni
Y1  - 2023/04/20
PY  - 2023
N1  - https://doi.org/10.11648/j.ajhc.20230901.11
DO  - 10.11648/j.ajhc.20230901.11
T2  - American Journal of Heterocyclic Chemistry
JF  - American Journal of Heterocyclic Chemistry
JO  - American Journal of Heterocyclic Chemistry
SP  - 1
EP  - 8
PB  - Science Publishing Group
SN  - 2575-5722
UR  - https://doi.org/10.11648/j.ajhc.20230901.11
AB  - In this study, functionalized magnetic nanoparticles of poly (ionic liquid) 1-allyl-3-methylimidazolium chloride were prepared through free radical copolymerization method and tested as a high efficient adsorbent for the removal of anionic dyes in water samples. The physical and chemical structure of prepared magnetic nanoparticles (MNPs) were investigated using Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Next, synthesized magnetic nanoparticles were used in magnetic solid phase extraction (MSPE) method to extract three anionic dyes (Alizarin Red S, Congo Red and Methyl Orange) in water samples. Also, the effect of several parameters such as pH, temperature, contact time and amount of adsorbent was investigated and the optimum values were determined. In addition, the adsorbent has a high ability to remove anionic dyes from water samples containing different dyes. Limit of detection (LOD), limit of quantitation (LOQ), and correlation coefficient were determined for methyl orange, Congo red and alizarin red S dyes under optimum conditions. The synthesized magnetic nanoparticles can be collected by an external magnetic field and regenerated with an alkaline solution (NaOH) and reused. The obtained results showed that the MNPs@PIL method was very efficient and successful in removing dye pollutants in water samples.
VL  - 9
IS  - 1
ER  -

Copy | Download

Author Information

Mahboobeh Falahati

Department of Chemistry, Imam Khomeini International University (IKIU), Qazvin, Iran
Majid Soleimani

Department of Chemistry, Imam Khomeini International University (IKIU), Qazvin, Iran
Fateme Aflatouni

Department of Chemistry, Imam Khomeini International University (IKIU), Qazvin, Iran

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Mahboobeh Falahati, Majid Soleimani, Fateme Aflatouni. (2023). Separation and Preconcentration of Anionic Dyes Using Magnetic Nanoparticles with Modify Polymer Ionic Liquid. American Journal of Heterocyclic Chemistry, 9(1), 1-8. https://doi.org/10.11648/j.ajhc.20230901.11

Copy | Download

ACS Style

Mahboobeh Falahati; Majid Soleimani; Fateme Aflatouni. Separation and Preconcentration of Anionic Dyes Using Magnetic Nanoparticles with Modify Polymer Ionic Liquid. Am. J. Heterocycl. Chem. 2023, 9(1), 1-8. doi: 10.11648/j.ajhc.20230901.11

Copy | Download

AMA Style

Mahboobeh Falahati, Majid Soleimani, Fateme Aflatouni. Separation and Preconcentration of Anionic Dyes Using Magnetic Nanoparticles with Modify Polymer Ionic Liquid. Am J Heterocycl Chem. 2023;9(1):1-8. doi: 10.11648/j.ajhc.20230901.11

Copy | Download

@article{10.11648/j.ajhc.20230901.11,
  author = {Mahboobeh Falahati and Majid Soleimani and Fateme Aflatouni},
  title = {Separation and Preconcentration of Anionic Dyes Using Magnetic Nanoparticles with Modify Polymer Ionic Liquid},
  journal = {American Journal of Heterocyclic Chemistry},
  volume = {9},
  number = {1},
  pages = {1-8},
  doi = {10.11648/j.ajhc.20230901.11},
  url = {https://doi.org/10.11648/j.ajhc.20230901.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajhc.20230901.11},
  abstract = {In this study, functionalized magnetic nanoparticles of poly (ionic liquid) 1-allyl-3-methylimidazolium chloride were prepared through free radical copolymerization method and tested as a high efficient adsorbent for the removal of anionic dyes in water samples. The physical and chemical structure of prepared magnetic nanoparticles (MNPs) were investigated using Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Next, synthesized magnetic nanoparticles were used in magnetic solid phase extraction (MSPE) method to extract three anionic dyes (Alizarin Red S, Congo Red and Methyl Orange) in water samples. Also, the effect of several parameters such as pH, temperature, contact time and amount of adsorbent was investigated and the optimum values were determined. In addition, the adsorbent has a high ability to remove anionic dyes from water samples containing different dyes. Limit of detection (LOD), limit of quantitation (LOQ), and correlation coefficient were determined for methyl orange, Congo red and alizarin red S dyes under optimum conditions. The synthesized magnetic nanoparticles can be collected by an external magnetic field and regenerated with an alkaline solution (NaOH) and reused. The obtained results showed that the MNPs@PIL method was very efficient and successful in removing dye pollutants in water samples.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Separation and Preconcentration of Anionic Dyes Using Magnetic Nanoparticles with Modify Polymer Ionic Liquid
AU  - Mahboobeh Falahati
AU  - Majid Soleimani
AU  - Fateme Aflatouni
Y1  - 2023/04/20
PY  - 2023
N1  - https://doi.org/10.11648/j.ajhc.20230901.11
DO  - 10.11648/j.ajhc.20230901.11
T2  - American Journal of Heterocyclic Chemistry
JF  - American Journal of Heterocyclic Chemistry
JO  - American Journal of Heterocyclic Chemistry
SP  - 1
EP  - 8
PB  - Science Publishing Group
SN  - 2575-5722
UR  - https://doi.org/10.11648/j.ajhc.20230901.11
AB  - In this study, functionalized magnetic nanoparticles of poly (ionic liquid) 1-allyl-3-methylimidazolium chloride were prepared through free radical copolymerization method and tested as a high efficient adsorbent for the removal of anionic dyes in water samples. The physical and chemical structure of prepared magnetic nanoparticles (MNPs) were investigated using Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Next, synthesized magnetic nanoparticles were used in magnetic solid phase extraction (MSPE) method to extract three anionic dyes (Alizarin Red S, Congo Red and Methyl Orange) in water samples. Also, the effect of several parameters such as pH, temperature, contact time and amount of adsorbent was investigated and the optimum values were determined. In addition, the adsorbent has a high ability to remove anionic dyes from water samples containing different dyes. Limit of detection (LOD), limit of quantitation (LOQ), and correlation coefficient were determined for methyl orange, Congo red and alizarin red S dyes under optimum conditions. The synthesized magnetic nanoparticles can be collected by an external magnetic field and regenerated with an alkaline solution (NaOH) and reused. The obtained results showed that the MNPs@PIL method was very efficient and successful in removing dye pollutants in water samples.
VL  - 9
IS  - 1
ER  -

Copy | Download